REINFORCING ACCESSORIES

Builders film is placed beneath the slab prior to pouring the concrete, creating a waterproof and moisture barrier. Additionally, it can be used to protect products and provide ease of transport from one place to another. 

• Black HIGH Impact - 4m x 200um x 50m
• Black HIGH Impact - 2m x 200um x 50m

Other sizes on request

• 4m x 100um x 100m
• 3m x 100um x 100m
• 2m x 100um x 100m

10mm thick x 25m long coils 

Widths - 50mm, 75mm, 100mm, 125mm, 150mm, 200mm, 300mm

Abelflex Foamjoint is a closed cell polyethylene foam used as an expansion joint filler in concrete joints, brick joints, blockwork, isolation joints and hinge joints. It is a compressible material which allows for expansion and contraction of concrete slabs. 

Rigid Bitumen Fiberboard Expansion Joint ON REQUEST

STANDARD 3m Lengths

Flat Strips: 90mm,110mm,150mm, 190mm, 200mm, 230mm, 250mm, 270mm or 300mm.  

Cavity Bridge: 250mm, 270mm

Economical, pre-greased Galvanised Slip Joints use a graphite grease lubricant sandwiched between two layers of galvanised sheet metal to slide concrete bearing structures over brick, masonry block, or corbels. 

Yellow 12-20 & Orange 24-36 

The ReoSok otherwise known as a Safety Cap is the simplest solution to providing protection from exposed or protruding reinforcing bars on-site.

Providing both impalement protection and scratch resistance, the ReoSok caps are quick and easy to fit, economical and safe. Please note that the ReoSok is not designed for high load vertical impacts, such as someone falling from height - unless used in unison with a N12 lacer bar.

Yellow 12-20 & Orange 24-36 

The unique LifeGuard Impalement Prevention Safety Caps guard against reinforcing bars, and are ideally suited to sites that require added safety from potential falls from a height. The LifeGuard is a quick fit cap with a large diameter encapsulated metal insert. It also features a centrally raised boss that ensures that the reinforcing bar is retained in the sleeve preventing breakout through the side of the sleeve.

1.57mm diameter and various materials like black, galvanised and stainless steel.

Tie wire is made of annealed wire and is widely used in tying reinforcement bars and reinforcing mesh. It has high tensile strength and is the most commonly used product for tying reinforcement.

Black, Silver and Clear. 

Duct tape, also called cloth tape, is a long-lasting adhesive tape which can be easily torn by hand. It's suitable for indoor and outdoor use thanks to its strength and water resistance. It's available in various widths, lengths and colours.

Closed Cell Backing Rod is a compressible, closed cell polyolefin foam tube with an outer skin. It is used as a backing for cold applied sealants in expansion/construction joints and building seal applications.   

FROM 450mm to 2400mm

Star pickets are multipurpose metal stakes often used as upright posts to support barricading material for cordoned off areas. 

Black Handle German made heavy duty hand tie tool.

Compatible with bag/wire ties